Products
-
Gate valve
Design, manufacture conforms to DIN EN1171
Face to face dimension conforms to Series 14 of BS EN558-1
Flange drilled conforms to BS EN1092
Nominal pressure: 1.6Mpa
Suitable medium: Water, oil, steam
Size: DN40~DN400 -
Double balls air valve
Flange end double orifice air valve
Norminal pressure: 1.6Mpa
Suitable medium: Water, oil, steam
Size: DN40~DN300 -
Stainless steel pipe
Stainless steel pipe
Material: 304, 316, 316L
Tee, bend and other stainless steel pipe fittings are also available -
Ductile iron pipe
Ductile iron pipe
Pressure gauge for hydrostatic testing standard: Class K9 Standard ISO2531 EN545: 2010
Internal & External protections:
Internal: Cement mortar lining complying with ISO4179 EN545: 2010
External: Metallic Zinc coating + Bitumen compling with ISO8179 EN545: 2010
Size: DN80 ~ DN2600 -
casting
Stainless steel floor drain -
casting
Different castings -
Flow control valve / Needle valve
Flow control valve / Needle valve
Nominal diameter: DN200-DN2000
Nominal pressure: PN6、PN10、PN16、PN25
Working temperature: ≤80℃
Connecting type: Flange
Main Material: Ductile iron body, other main internal parts made of stainless steel.
Driving mode: Electric (it is connected with AUMA matic) -
Aluminium coil & sheet
Range supply: Aluminium & Alloy foil, sheet, plate, pattern sheet, and rod
Conditions: Original status, heat-treatment, prepainted & coating Al. coil -
Gate valve
Design, manufacture conforms to BS5163 Type B
Face to face dimension conforms to BS5163
Flange drilled conforms to BS1092-2
Suitable medium: Water
Temperature: < 100°C
Suitable medium: Water, oil, steam
Nominal pressure: 1.6Mpa
Size: DN50 ~ DN300 -
Float valve
Float valve
Nominal pressure: 1.6Mpa
Suitable temperature: 0~80°C
Suitable medium: Water
Size: DN50 ~ DN300 -
Y strainer
Flange drilled conforms to BS EN1092
Face to face dimension conforms to Series 1 of BS EN558-1
Suitable medium: Water, oil, steam
Nominal pressure: 1.6Mpa
Size: DN50 ~ DN600 -
Y strainer
Flange drilled conforms to BS EN1092
Face to Face dimension conforms to Series 1 of BS EN558-1
Suitable medium: Water, oil, steam
Nominal pressure: 1.6Mpa
Size: DN15 ~ DN600 -
Check valve
Design, manufacture conforms to DIN EN12334
Face to face dimension conform to Series 48 of BS EN558-1
Flange drilled conforms to BS EN1092
Suitable medium: Water oil steam
Size: DN40 ~ DN300 -
Check valve
Design, manufacture conforms to MSS SP-71
Face to face dimension conforms to ANSI B16.10
Flange drilled conforms to ANSI B16.1
Suitable medium: Water, oil, steam
Size: 2" ~ 12" -
Check valve
Check valve
Design, manufacture conforms to BS EN12334
Face to face dimension of DN50-400 conforms to series 10 of BS EN558-1
Flange drlled conforms to BS EN1092
Suitable medium: Water, oil, steam
Nominal pressure: 1.6Mpa
Size: DN50~DN600 -
Stainless steel coil, plate & sheet
Hot rolled stainless steel coil & plate, Cold rolled stainless steel coil, sheet & plate
Material code: 304, 304L, 316, 316L, 430, 439, 201, 202
Surface finishing: BA, Hairline, No. 2B, No. 2D, No. 3, No. 4, or any special result
Standard width: 1219mm, 1250mm, 1500mm, 1800mm, 2000mm
Standard length: 6000mm, 8000mm, 11000mm
Packing & Shipment: Coil, wooden pallet.
Slitting, shearing, and surface-finishing treatment service is available.
